Concrete consists of cement, sand, gravel and water. As the water evaporates, the other ingredients cure into a hard slab. This curing process causes the concrete to shrink, which results in cracks. Most basement cracks are caused by this normal curing process, or by natural settling of the foundation, and don't often indicate a structural concern.
The Crack Team's methods of repairing cracked and leaking foundations are designed to be cost-effective and reliable. And though some waterproofing companies may propose extensive repairs, all of The Crack Team's work is done inside the home. Our processes are quick, simple, and clean.
The Crack Team has a solution for:
- concrete foundation cracks
- leaks in your stone or block foundation
- unsightly cracks in your patio or sidewalk
- Garage, basement, showroom floors
- CrackMatch
The Crack Team's process of foundation repair uses multiple types of resins to inject cracks. Our exclusively-formulated TeamSeal®, TeamFlex® and TeamFill® products are used to permanently waterproof concrete foundation cracks.
TeamSeal®
Our exclusively-formulated TeamSeal® serves as a barrier for the injection material, and also holds the injection nozzles in place so that no drilling of the foundation is necessary.
TeamFlex® Resin
Injecting a crack with urethane resin is the ideal process for wider cracks and/or cracks in newer homes. Our revolutionary TeamFlex® compound is a moisture-activated flexible material that provides a permanent seal, even if there is future movement in the foundation.
TeamFill® Resin
Epoxy is a two-part material consisting of resin and a hardener. When mixed, these liquids create a 'super-glue'-like bond. Injecting a crack with epoxy resin is ideal in cracks where there will be little or no movement in the foundation.
Our exclusively-formulated TeamSeal® serves as a barrier for the injection material, and also holds the injection nozzles in place so that no drilling of the foundation is necessary.
TeamFlex® Resin
Injecting a crack with urethane resin is the ideal process for wider cracks and/or cracks in newer homes. Our revolutionary TeamFlex® compound is a moisture-activated flexible material that provides a permanent seal, even if there is future movement in the foundation.
TeamFill® Resin
Epoxy is a two-part material consisting of resin and a hardener. When mixed, these liquids create a 'super-glue'-like bond. Injecting a crack with epoxy resin is ideal in cracks where there will be little or no movement in the foundation.
 TeamStop™ is our proprietary gel-based epoxy sealant that provides an effective barrier for cracks and leaks in block and stone foundations.Because it's clear, TeamStop™ has many applications and can also be painted. |
|
 Fab-Slab™ is a flexible, polyurethane compound designed to minimize the appearance of cracks in concrete. It can be applied to interior and exterior cracks.Fab-Slab™ is available in a variety of colors to best match the surrounding concrete. Think of it as make-up...for cracks! |
|
 Block Out Moisture Exclusively formulated TEAMBLOCK is a waterproofing paint designed to block out moisture in concrete and masonry walls. Unlike ordinary paint, TEAMBLOCK is an elastomeric acrylic latex coating which actually penetrates the masonry. Once cured, TEAMBLOCK provides a water-tight barrier to block out moisture and seepage. |
 Seals and Conceals • An acrylic coating for interior and exterior concrete surfaces. • Easy to maintain, long-lasting, aesthetically pleasing. • Available in six non-fading colors. • Perfect for garage floors, basement floors, showrooms/warehouses, and concrete patios. |
 |
 •CrackMatch is a custom-blended filler designed to eliminate the appearance of cracks in indoor and outdoor surfaces. |
 |